Can be used for manipulator control, including using UAIBO motors, or servo motors and optional external grating rulers. Note that if you use UAIBO motors, you need to install the following USBC driver.
Version: 1.6.4.57

Used for UFO control, including up to three degrees of freedom: rotation, telescopic and Z. Please go to the pre-installation download and install the USBC driver before use.
Version: 1.6.6.22

For PLD control, including up to three degrees of freedom: revolution, rotation and Z. Please go to pre-installation to download the USBC driver before use.
Version: 1.6.5.5

Can be used to connect XGS-600. Controlled by RS485 communication, equipped with a dedicated DB9 connection cable. If a USB-RS485 cable is used to connect to the computer, the following USB-RS485 driver must be installed.
Version: 3.2.5

Controlled by RS485 communication. If USB-RS485 cable is used, please go to pre-installation to download and install USB-RS485 driver before use.
Version: 1.6.1

Controlled by RS485 communication. If using USB-RS485 cable, please go to pre-installation to download and install USB-RS485 driver.
Version: 1.1.3

*使用本站软件前需要下载此软件进行安装

Controlled by RS485 communication. If using USB-RS485 cable, please go to pre-installation to download and install USB-RS485 driver.
Version: 1.3.3

*所有通过RS485通讯的程序必须安装此软件

If the system uses the UAIBO stepper motor, it must be installed

Controlled by RS485 communication. If using USB-RS485 cable, please go to pre-installation to download and install USB-RS485 driver.
Version: 2.2

If you use a USB to RS485 cable, you need to install this driver if the operating system fails to automatically recognize and install the driver.